Bosch motorsports 60mm DBW throttle body

This throttle body is to be used with our adapter on a b230 intake manifold when converting to drive by wire.

B230 to Bosch 60mm DBW throttle body adapter

This adapter allows you to bolt a 60mm Bosch motorsports 0280750151 throttle body to your stock B230 intake manifold. T…

240 to prius throttle pedal adapter

This adapter allows a Toyota Prius throttle pedal to be installed in a Volvo 240.  It require Toyota part number 78110-…

240 TKX front drive shaft

This is a modified front 240 drive shaft.   This replaces the stock front drive shaft on any 240 and is setup in the p…

16v GM ls coil mount

These brackets are cnc machined out of 1/4" aluminum and then powder coated black. This mounts to the valve cover and in…

Billet steel 8v crank gear.

This gear is a replacement for the powdered metal crank gears that are prone to failure.   This is for the round tooth…

v8 t5 pilot bearing

T5 transmissions have two pilot bearing options.  If using a 4 cylinder input shaft you will be using the stock Volvo M…

Redblock clutch hardware kit

6 m8 allen bolts use to attach a pressure plate to either a stock Volvo flywheel or our billet steel flywheels.

Budget 8v Redblock head stud kit

This head stud kit fits somewhere between stock bolts and the ARP 2000 studs.  They are lower quality, thats not to say…

235mm light pressure redblock clutch and flywheel package

This is the same flywheel as our high performance clutch kits except it uses a factory Toyota pressure plate to keep the…

Redblock +T oil feed adapter

This fitting allows for a -4 oil feed line to be installed below the oil pressure sender.  This is the easiest oil sour…